|
Our company is the first companies to research
and produce outphase ion exchange member, whose material is novelty,
whose design is reasonable and where function is superior. Used
in automobile, machine, electric, appliances and hardware etc.
Its material include high-quality member material, we produced
and polymer frame and tight structure, which is thin, homegeneous
and high transparency. It can meet the bequest of the related profusion.
We are familiar with the physical and chemical characters of the
ion exchange member; we offer flexible space for the design of tubular
type dissentient anode subassembly. So we can guarantee the surface
is smooth and clean and clear, despite of any kinds of condition:
hence, shrivel, craze and pollution caused by dope calculation can
not happen. Rapid consume of electrode and electrode liquid caused
by mixing of dope and electrode liquid, in equal of current direction
on the surface of the member, which can influence the member life
etc. We can avoid such phenomenon too, its ion penetrating rate
is very high (near 100%), and so it can compare with the same kind
product of the market currently. Because of the decrease of suassembly,
contructue cost is lowered.
Work Principle
As the dissepiments anode, the structure is legerity, compact
and design is reasonable, it is very continent to dismantle and
install on the wall of electrophoresis slot. Connect into anode
liquid circulatory system in the process of the opertion, Ion can
pass member selectively because of active group R-CH2B+(CH3)3.of
the member. Anion such as surplus acid radical in the slot can be
done away with. Two characteristic values (PH value and conductance
rate) stay in particular scope of technical parameter proper run
of the production line and the quality of the working parts can
be quarantined CED production line give the working parts many good
function, such as good adornment, antisepsis and bear the weather.
External Appearance
CED is a tubular unit, including special steal electrode, polymer,
PE outpase ion exchange member, protecting wire net, base and end
socket, outline and part sizes show as diagram.
L-valid length of tube, it is decided by electrophoresis slot
and practical situation of the process.
M-orientation size of interface of electrode liquid return pike
tie-in
N-the length size of interface of electrode and electrode liquid
M and N is decided by electrophoresis slot practical install situation
 |
 |
Specification
| Diameter(mm) |
Valid member area of the unit length(m2) |
The outside diameter of the electrode tube(mm) |
Valid electrode outside area of the length(m2) |
| 85 |
0.267 m2/m |
Φ50 |
0.157 m2/m |
Function
The main physical and chemical function of CED should meet the following
provision
|
Item
|
Target value
|
1.physical and chemical function of member body
2.extreme current intensity(dynamic state) of member body
3.liquid discharge of the anode(according to the valid area) |
According to the request of outphase ion exchange
member brand 338650A/m36-10L/ m3/min |
The main physical and chemical function of ion exchange member 3368(CED)
|
Experimental Item
|
Unit
|
Target
|
| The rate of water |
%
|
30-40
|
| Exchange capacity(dry)− |
Mol/kg
|
1.8
|
| Electric resistance of member appearance＋ |
Ω.cm2
|
42
|
| Chosen penetrating rate− |
%
|
89
|
| Penetrating rate of water＋ |
Ml/h.dm2
|
0.2
|
| Demolish integrality− |
MPa
|
0.6
|
| Acid-proof degree(0-7) |
PH
|
Good
|
| Oxide resistance＋(decrease value of exchange capacity,
after 8 hour in 2%H2O2 |
Mol/k(dry)
|
0.04
|
Symbolize pack transportation and save
1. Transport by cardboard ox wood box, after sealed by plastic bag,
the following items should be marked clearly, the company, product
name the date and specification of the product. Certificate of conformity
of the quality inspection part and transporting precaution should
be provided too.
2. The product should be stored in the house, which is clean, cool,
dry and ventilate, the sun shine, rain pour and machine heart are
not allowed.
3. The validity is two years temporarily |
